There are several instances in which a toilet flush is disrupted, and one of the most inconvenient things to encounter is when you try to empty your toilet but cannot. Is there something stopping it? Is anything wrong with part of your toilet? If this should happen, you might be alarmed, but there’s no need to panic or call a plumber right away. Fortunately, this issue is relatively common, and our skilled plumbers at New Albany Plumbing & Drain have presented the following advice to aid you in diagnosing and rectifying it!
Do You Have A Toilet That Is Backed-Up?
A backed-up toilet is usually the source of the problem. The toilets were designed only to handle a particular quantity of waste. Therefore back-ups are quite common. After a lot of toilet paper or sanitary goods are flushed and collected in one go, back-ups typically occur. Blocks in toilets may be readily identified and resolved. You should be able to push the clogged items through using a plunger if the obstruction persists. If the block does not budge with a plunger, you’ll need to call a plumber out with a toilet auger to remove it from your toilet.
Is The Water In Your Tank Low Lately?
A complete flush requires your toilet’s tank to be completely filled with water. This is because a full flush uses 80% of your toilet’s total water capacity. Therefore, if there isn’t enough water in the toilet tank, the float ball might become misaligned, signifying a lack of water to clean. To see whether this is the case, open your toilet tank and make sure the float ball is floating 1 to 2 inches below the fill valve and overflow tube. If it doesn’t, adjust its position until it does so.
Does Your Toilet Run For A Long Period Of Time After You Flush?
If your toilet performs a full flush but continues to run after, there’s a chance you have a problem with the flapper or fill valve. If this isn’t addressed immediately, you could be wasting water without realizing it or else having difficulties flushing it again in the future. The most common reason your toilet’s flapper doesn’t entirely close is because it’s damaged or warped. If this is the case, the problem is often due to age and use over the years on your toilet’s flapper or mineral deposit in its fill valve. If either of these issues causes your toilet to run continuously, you’ll need to call a local plumbing professional as soon as possible.
When Is It Time to Request a Visit From the Professionals?
Dealing with a toilet that won’t flush or continues to run can be very inconvenient for the entire household, so fixing the problem should be a top priority. Ultimately, there are many reasons why your toilet may not be working properly. If the points above do not align with the problem at hand, it is best to get in touch with a licensed plumber, such as the professionals at New Albany Plumbing & Drain! Call us today at (614) 245-3319, or schedule an appointment online now by clicking here!